Custom Search
2.2.12
Custom Search
2000 Chevrolet Project Corvette C5
This Project Corvette is a fully serviceable drive project car.
The Project Corvette will start, does runs, will stop, and is a fully
serviceable that could be that could be used as Corvette project car hot
rod. The cooling system is working. However, there are no air bags
installed with this project Corvette car. Maybe this could be a grand
project car for a older project street rod or rebuilder. The suspension and
the 345 horsepower Corvette LS1 V8 Engine could also be a just what
the doctor ordered for a transplant to improve a broken down Corvette.
Project cars like this Corvette may also
use this as a drag-car strip vehicle. Of course before buying something like
this you want to make sure that the engine is running good. If you
can, try to a compression test on all the cylinders. A compression test will
tell you if any of the cylinders have break.
A vacuum test ensures the engines internals are efficient and the
Corvette engine has a good vacuum pull to
it. Of course if the project engine has a low output of vacuum stress then
you should know that a project engine has internal damage and needs thought
for the prospect to rebuilt or not.
It's good to do an oil pressure analysis when the engine is warm and when
it's cold. Also, a good CO test should be done to make sure there is no harm
done to the heads or block.
The find project cars like this project Corvette is to go to places like Cleveland Pick-A-Part they specialize in project cars.